dash molding Q’s

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38963
Printed Date: July 12, 2025 at 6:26 AM

Topic: dash molding Q’s

Posted By: redmonkey
Subject: dash molding Q’s
Date Posted: September 11, 2004 at 12:53 AM

HEy Im wanting to make a frame for a 7.5 LCD screen in my dash where the A/C controls are. How do I do that what meterials would I need to get/use? is there like some type of clay or something?

Replies:

Posted By: auex
Date Posted: September 11, 2004 at 1:22 AM

What kind of car? Also look through a couple of pages for a mazda6 install.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: 93accordSE
Date Posted: September 11, 2004 at 10:40 AM

I would suggest you look at www.hzemall.com ' s product page. He uses some good products and would know the best way / best products to use. There is liquid plastic, and i'm sure a certain putty you can use. Good luck

-------------

Print Page | Close Window