fg a rear deck

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39566
Printed Date: May 15, 2025 at 7:09 PM

Topic: fg a rear deck

Posted By: boxmaker85
Subject: fg a rear deck
Date Posted: September 22, 2004 at 5:05 PM

I'm planning on fiberglassing a rear deck. My question is will I be able to treat the carpet (like a pulled wooly materieal) like stretched cloth you resin for a box? Or should I make a mold of something that looks like it and then resin and fg that?

Replies:

Posted By: defective
Date Posted: September 22, 2004 at 7:21 PM

what kind of car, you may not be able to put it back in once stiff....... but anyway, yes, the material on it should hold resin, that's what you would do if you need to gloss a headliner. Personally, if i was going to glass a rear deck, i'd take a mold, build a frame, then build something one-off.... my 2cents

-------------

Posted By: boxmaker85
Date Posted: September 22, 2004 at 9:08 PM

so I should build a mold for the deck then and not resin and fg it? Ok sounds good. I've got a Pontiac Grand Prix. Enough room on the deck to put a couple of 10" subs. I might be doin that, so that's why I'm wonderin. Thanks

Print Page | Close Window