Print Page | Close Window

Dodge Subwoofer enclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40245
Printed Date: May 11, 2025 at 2:42 AM


Topic: Dodge Subwoofer enclosure

Posted By: 12slack
Subject: Dodge Subwoofer enclosure
Date Posted: October 03, 2004 at 11:22 PM

Could anybody be able to design plans/blueprints for a 15 inch subwoofer in a ported box with tuning of 24hz and net volume of around 4.0 cubic feet to be place in the trunk of a 1995 dodge neon? The sub plans can include the sub be mounted inverted or normal.Would like the speaker be facing toward the back of the trunk (towards the rear of the car)at roughly 90 degrees(for loudness). Will pay money(say around 20.00 dollars?). Email me at shaggyscrappy@hotmail.com or PM me hear.Tearing my hair out trying to design this enclosure! Odd shaped for sure! Not worried about using(up!)trunk space.
Thanks and get back to me!
Max trunk opening width is 33.5
max trunk opening is 17.5 inches high
max depth is around 20 inches for trunk opening



Replies:

Posted By: boxmaker85
Date Posted: October 05, 2004 at 12:06 PM
Quick somebody call Fiberglass Man!!!  LOL That's what you'll probably be doin man.  And w/ 4 cu ft LOTS of it.  Wish i could help but I'm not one for massive ported boxes.



Posted By: 12slack
Date Posted: October 05, 2004 at 12:47 PM
Who is fiberglass man?



Posted By: boxmaker85
Date Posted: October 05, 2004 at 2:24 PM
Just being stupid (spiderman, superman, fiberglassman?).  Get it? No? Ok nevermind.


Print Page | Close Window