hiding rca wires

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40347
Printed Date: May 07, 2025 at 5:58 PM

Topic: hiding rca wires

Posted By: 93accordSE
Subject: hiding rca wires
Date Posted: October 05, 2004 at 8:02 PM

I pretty much have the basic idea of hiding wires. But RCA wires have the plugs on them. How would you go about hiding these in a mdf/fiberglass enclosure?

Replies:

Posted By: boxmaker85
Date Posted: October 05, 2004 at 9:33 PM

Build the fg so that it has a "lip" on it. It's where the amp is "sunk" into the fg mold or the glass is built up around the ends/top and bottom of the amp and allows you to just see the amp and none of the wires/plugs. Not too hard to do but requires some patience and knowledge of fg molding/shaping.

Print Page | Close Window