Print Page | Close Window

hzemall

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42005
Printed Date: May 16, 2024 at 7:39 PM


Topic: hzemall

Posted By: dirtylooks
Subject: hzemall
Date Posted: October 31, 2004 at 9:04 PM

does any one know if hzEmall  glassed the box for the lincoln or did he just use resin....if just resin is that strong enough???

-------------
A way of life..



Replies:

Posted By: 93accordSE
Date Posted: October 31, 2004 at 10:14 PM
Why don't you email and ask him, hes not anti social. I'm sure he used mat.

-------------




Posted By: dirtylooks
Date Posted: October 31, 2004 at 11:11 PM
i did haven t got a response yet.....just seeing was that idea was realistic

-------------
A way of life..




Posted By: soup
Date Posted: November 08, 2004 at 2:03 AM

I am sure he used fiberglass on the box itself, most likely he did not use any glass on the trim paneling though.

On most of Tim's installs that I have seen on the net and in RSM magazine, he is a bit of a fiberglass fiend : )  Seems like he is a "better safe than sorry person"   (I wish i was more like that sometimes)

Chances are, seeing as how those eclipse will create some pressure, he used quite a bit of mat.





Posted By: hzemall
Date Posted: November 26, 2004 at 5:26 PM

dirtylooks wrote:

does any one know if hzEmall  glassed the box for the lincoln or did he just use resin....if just resin is that strong enough???

What part are you talking about ? The actual box was a sealed MDF box, the stretched section on top was just fleece with resin, LOTS of resin, it is hard to explain how I resin my fleece, but it will reach the 1/4" thick status when done.

I don't come here much either so I didn't see your post before now, if you guys ever have any questions, please email me, I do respond :)



-------------
Tim Baillie
Installer/Designer/Fabricator
Certified Autosound & Security





Print Page | Close Window