Flushing in amps into the backseat.

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42172
Printed Date: April 29, 2024 at 6:59 AM

Topic: Flushing in amps into the backseat.

Posted By: bassinbuddha
Subject: Flushing in amps into the backseat.
Date Posted: November 03, 2004 at 12:40 PM

I have a 2004 Mazda3 hatchback. I need every ounce of room in the back for the box. How would I go about flushing the sub amps into the back seat?

I do have 60/40 seats, but I was thinking about attaching them permanently together and getting the whole seat re-carpeted once done.

Thanks

Replies:

Posted By: realitycheck
Date Posted: November 03, 2004 at 12:49 PM

If youre going to have them recarpeted just make the racks out of mdf and have them cover the mdf and the seat at the same time.

Posted By: punkrokdood
Date Posted: November 05, 2004 at 9:30 AM

I found this link through a forum for my car... there's no instructions, but there are pics of the build, hope it helps posted_image

https://www.cardomain.com/memberpage/239025/5

Print Page | Close Window