My FG project in the works
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43075
Printed Date: May 18, 2024 at 4:58 AM
Topic: My FG project in the works
Posted By: silentdaredevil
Subject: My FG project in the works
Date Posted: November 15, 2004 at 8:56 PM
Replies:
Posted By: auex
Date Posted: November 15, 2004 at 9:09 PM
Post some more info man.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: realitycheck
Date Posted: November 16, 2004 at 7:11 AM
Yeah i'm a little confused on whats going on.
Posted By: dxav
Date Posted: November 16, 2004 at 8:48 AM
Is that for a square solo-baric, or an amp?
Hope you didn't have to flex the enclosure to get it in, with glass on it, remember, it won't flex. And make sure you accommodate for thickness tolerances for the glass. It looks like you're coming close to the underside of the rear deck.
Looks kinda cool, though.
DXAV
Posted By: placid warrior
Date Posted: November 17, 2004 at 2:31 AM
yea...it looks like your doing a good job so far...more info would be nice thugh...and maybe some more pics if u got any farther.
Posted By: kickerstang
Date Posted: November 17, 2004 at 3:05 PM
 WHAT IS THAT?!?!?!? ------------- what!?!?! you want some??
Posted By: silentdaredevil
Date Posted: November 17, 2004 at 8:34 PM
its for an amp to run highs and mids and yes i know about clearances and everything... i started laying the glass but didn't get that done yet
Posted By: realitycheck
Date Posted: November 17, 2004 at 9:18 PM
Alright cool man give us more pics when you get a chance were pic whores on here, we love to see photos.
Posted By: HottAccord
Date Posted: November 17, 2004 at 10:21 PM
realitycheck wrote:
Alright cool man give us more pics when you get a chance were pic whores on here, we love to see photos.
I agree, looks like a clean job so far!  ------------- Im a fiberglass whore!!
Posted By: silentdaredevil
Date Posted: November 21, 2004 at 10:26 PM
here im gonna start all over like i never posted this... 
and thats as far as i got for now i still have a little fiberglassing to do yet but for the most part that area is done
Posted By: placid warrior
Date Posted: November 22, 2004 at 12:23 AM
thanks man...i like the pics. u gonna put 2 amps in there or just one? looks like u got room for 2. or are u gonna make a cover for it with a plexi hole and put in some LEDs or something...or just open?
Posted By: realitycheck
Date Posted: November 22, 2004 at 7:37 AM
Good job man, looks good. Keep up the good work and the pics coming man.
Posted By: silentdaredevil
Date Posted: November 24, 2004 at 9:31 PM
just one amp and im not fully decided on how i want to cover it... would i have a problem with over heating if i went with plexi glass?
Posted By: hersheyloc
Date Posted: November 25, 2004 at 2:23 AM
It's looking pretty sweet man. I'm about to start a trunk project of my own. How is ur clearance from the hinge of the trunk lid? I love the framework tho..those supports around the wheel well totally look like flying butresses. Anyone else see it?
-------------
Posted By: silentdaredevil
Date Posted: November 25, 2004 at 12:18 PM
hersheyloc wrote:
It's looking pretty sweet man. I'm about to start a trunk project of my own. How is ur clearance from the hinge of the trunk lid? I love the framework tho..those supports around the wheel well totally look like flying butresses. Anyone else see it?
i got super lucky on that one it clears with just a smidge left
Posted By: Sobe_Death
Date Posted: December 07, 2004 at 2:19 PM
hey man, thats an ED (88-91) civic 4 door trunk isnt it?
Posted By: silentdaredevil
Date Posted: December 08, 2004 at 9:19 PM
no its a 5th gen EJ 94
|