Print Page | Close Window

"Noob" to this site.

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43112
Printed Date: May 11, 2024 at 10:31 PM


Topic: "Noob" to this site.

Posted By: Stlb5
Subject: "Noob" to this site.
Date Posted: November 16, 2004 at 11:36 AM

Hey all. I've been on several other audio forums and just found this one. Looks like a real nice knowledge base. Hope I can learn more and maybe help a few myself. I've been glassing for about 2 years now. Mainly doing enclosures for VW Passats. I most recently did an enclosure for my RE Audio 12" XXX. Here are a few pix:

posted_image

posted_image

posted_image

posted_image

posted_image

posted_image

Here is the support I had to build for this beast:

posted_image




Replies:

Posted By: Stlb5
Date Posted: November 16, 2004 at 11:45 AM
thanks whoever fixed that.  Why can't I edit my own posts?




Posted By: heavilymedicate
Date Posted: November 16, 2004 at 11:49 AM

Cause you just cant man.  Apparently we don’t have that feature.  Welcome to the site, nice work.



-------------
What will you get for Christmas, bad boy? Coal........or Visonik?? - stevdart

Wow, is everyone clueless and lost in the dark? - uthinkuknoaudio




Posted By: the12volt
Date Posted: November 16, 2004 at 11:51 AM




Posted By: placid warrior
Date Posted: November 17, 2004 at 2:28 AM

hmmm...50 posts before we can edit...sounds good to me, this is just one more post leading up to the ability to edit....yay.

so is the 3rd pic inside the car or where is that...is it possible to get a farther back pic to get the entire layout of the trunk?  thanks.





Posted By: Stlb5
Date Posted: November 17, 2004 at 8:23 AM

Yes, that's inside the car.  It's between the wheel well and the rear of the trunk on the passenger's side of a 2001.5 VW Passat.  Here's another angle:

posted_image





Posted By: placid warrior
Date Posted: November 17, 2004 at 9:30 PM
thats pretty sweet man.  Hows it sound?  I like the fact that u wasted absolutely almost no valuble trunk space.




Posted By: Stlb5
Date Posted: November 18, 2004 at 8:37 AM
The one you're asking about was a Boston Pro 10.5 powered by my Fosgate Power 800a2.  It was okay, bottomed out pretty easily.  That's why I switched to the XXX.  Some of the other enclosures that I've done that are the same size have sounded a ton better than the Boston.





Print Page | Close Window