Grand Am door panels

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43730
Printed Date: May 21, 2024 at 6:50 PM

Topic: Grand Am door panels

Posted By: dowmace
Subject: Grand Am door panels
Date Posted: November 24, 2004 at 6:59 PM

Hey guys I'm making new FG door panels, well modifying my stockers, and I'm taking the stock vinyl of because it's easier to glass with it off, now everyone else I've seen make door panels has done the same thing, but I can't get this crap off, any suggestions on the easiest way to get it off? I've been using a heatgun and a flat head screw driver to scrape it off, but it's just being a pain, is there a solvent I need to get? thanks in advance!

Replies:

Posted By: bomex_eclipse
Date Posted: November 24, 2004 at 8:10 PM

Just Tug On The Vinal And Follow It With A Razor Blade Cutting The Fabric From The Foam.

-------------
If You Can Imagine It Glass It!

Print Page | Close Window