box building program

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43913
Printed Date: May 15, 2024 at 9:39 AM

Topic: box building program

Posted By: dedlyjedly
Subject: box building program
Date Posted: November 27, 2004 at 3:40 PM

just wondering if anyone had any first-hand experience with some good box building software. i would like the program to accomadate single-reflex bandpass, vented, sealed and possibly passive radiated boxes.

Of course free is always good, but if shareware won't get me what i really want, the prices for what you would recommend and a reason for me to spend the extra $$$ would be greatly appreciated.

also, i have a schematic of a vented enclosure as recommended by the sub manufacturer but the template is for a single sub configuration. i would like to do a dual sub box with one "common" vent. is there a rule of thumb or formula to calculate port dimensions for two using the numbers provided for 1 sub?!

thanks for your input

-------------
MECP certified, 5yrs experience, you probably otta listen bitch!!

Replies:

Posted By: auex
Date Posted: November 27, 2004 at 3:55 PM

WinIsd. Give it a shot.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: dedlyjedly
Date Posted: November 27, 2004 at 7:25 PM

where would you suggest i find that?

-------------
MECP certified, 5yrs experience, you probably otta listen bitch!!

Posted By: /R7
Date Posted: November 28, 2004 at 1:03 AM

google.ca its your friend, type in winisd.
or because i know the site:
https://www.linearteam.dk/