Begining pics

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44684
Printed Date: May 14, 2024 at 2:48 PM

Topic: Begining pics

Posted By: BoominRolla
Subject: Begining pics
Date Posted: December 07, 2004 at 9:27 PM

I'm new to this so please bear with me... any comments are welcome cause i'm already having a bad day so why not...
posted_image

-------------

Replies:

Posted By: BoominRolla
Date Posted: December 07, 2004 at 9:40 PM

The is the 1/2" lexan predrilled part way... with a 1/8" snap on bit broke off inside cause I suck...
posted_image

hopefully the pictures explain it all. The second one is of the lexan predrilled... but it won't come out... as of now I have the inside edges of the lexan all painted gloss white and clear coated and all screwed together and siliconed

-------------

Posted By: BoominRolla
Date Posted: December 07, 2004 at 9:49 PM

Posted By: realitycheck
Date Posted: December 08, 2004 at 7:52 AM

Is this the one of the bubbler you were making? Looks good so far man keep um coming.

-------------
Learning the trade one fiberglass creation at a time!

Posted By: Alpine Guy
Date Posted: December 08, 2004 at 2:49 PM

Just make shure no water touches any wood, , be shure the water tank is completely lexan.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.

Posted By: realitycheck
Date Posted: December 08, 2004 at 3:37 PM

That would be horrible if water got in that, mdf. Soak it up like a sponge, but no way you can ring that mdf out. haha little joke there.

-------------
Learning the trade one fiberglass creation at a time!

Posted By: BoominRolla
Date Posted: December 08, 2004 at 5:29 PM

lol, yeah the tank is completely made from 1/2" lexan I have all sides but the front face screwed together i'm strill trying to figure out how i'm gonna mount the bubble wand and exhaust tube... I have to figure out how to run the inlet hose up the side of the tank but i'm pretty sure I have that covered already... I still have to seal all the inside edges with white silicone, prime it paint it and gloss it... Then go to K-Mart to get my 4 10" neon tubes at $16 eachhopefully that'll be enough... then I have to figure out what i'm gonna do for a port... The specs for 1 12" is 4" round by 7.25" long... dunno? Still alot to do but now its starting to come together...

-------------