pics for you guys
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47055
Printed Date: May 07, 2024 at 11:46 PM
Topic: pics for you guys
Posted By: jt73
Subject: pics for you guys
Date Posted: January 06, 2005 at 12:46 PM
actually my page i created to get pics up...will get more of my project this weekend hopefully https://www.geocities.com/jsntarrant/ truckstuff.html
Replies:
Posted By: realitycheck
Date Posted: January 06, 2005 at 1:53 PM
its temporary unavailable, let you know the low down when theyre back up ------------- Learning the trade one fiberglass creation at a time!
Posted By: jt73
Date Posted: January 06, 2005 at 2:40 PM
alrighty...
Posted By: chris_h
Date Posted: January 06, 2005 at 6:20 PM
that's some slick looking paint work
-------------
When you step on the brakes your life is in your foot's hands
Posted By: bluetruck
Date Posted: January 08, 2005 at 7:05 AM
nice
Posted By: placid warrior
Date Posted: January 08, 2005 at 8:18 PM
WOW..thats pretty cool, havent seen that before...liking it lots. the paint job on the Bottle is sweet, who did that? did u?
Posted By: jt73
Date Posted: January 09, 2005 at 1:54 AM
Thanks for the compliment, I wish I could take credit for the artwork but a good friend of mine did the it....a very talented artist but he takes his sweet ass time! still waiting on my a-pillars, steering column cover, pass. airbag and the oval piece near the windshield to get done with the same graphics. i have 32 pieces color matched so far(not all airbrushed though), eventually it will all be BLACK/ red inside still cant get my pics of my PS2 in glovebox pics project I am doing to work... Try www.madmandesigns.com to see more of his work if you want to
Posted By: realitycheck
Date Posted: January 10, 2005 at 8:15 AM
Thats some awesome graphics man. I really like that rhino lining too, how did they do that? Just tape it off just like regular paint or something? Also man for your pics you can upload them to this site, by clicking on the little tree with arrow pointing up. ------------- Learning the trade one fiberglass creation at a time!
Posted By: jt73
Date Posted: January 10, 2005 at 8:51 PM
my images are too big too upload, like 125k, the rhino liner took madman and the liner guy like 8 hrs to do, yes they taped it with duct tape, and had to start peeling it and cutting it within like 30 seconds after it was sprayed
Posted By: realitycheck
Date Posted: January 11, 2005 at 8:01 AM
Thats cool man, hey you can shrink your phots in microsoft paint. Thats how I did mine go into paint, open the picture up. Then click on image, then click stretch/skew. Then where it says stretch , and it shows horizontal and vertical then it should say 100% in both boxes, you can shrink the numbers in those boxes until you get the right size each time you click ok, you can go back click on image again. Then click attribute it will say, size on disk and that will be what k your pic now is. You can continue to shrink if you need to, If you goof just dont save it and reload it start over.
-------------
Learning the trade one fiberglass creation at a time!
Posted By: jt73
Date Posted: January 11, 2005 at 10:02 AM
i dont know why they wont show up now...
Posted By: realitycheck
Date Posted: January 11, 2005 at 11:04 AM
make sure that you put .jpg on the end and it has to be in lower case letters you should be able to edit the ones that you've already uploaded.
-------------
Learning the trade one fiberglass creation at a time!
Posted By: jt73
Date Posted: January 11, 2005 at 1:48 PM
Posted By: jt73
Date Posted: January 11, 2005 at 1:51 PM
ahhhh finally....I understand now thanks Realitycheck, now if i can just get the pics of my crappy digital camera to work 
Posted By: realitycheck
Date Posted: January 11, 2005 at 2:01 PM
no prob man.
-------------
Learning the trade one fiberglass creation at a time!
Posted By: 4doormadness
Date Posted: January 13, 2005 at 2:21 PM
very nice looking...the Rhino work came out awesome. can't wait to see it w/ all of the other pieces in place and airbrushed..your friend has some mad skills... thanks for sharing the pics...
|
