Wood Grain Civic

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48683
Printed Date: May 04, 2025 at 11:38 PM

Topic: Wood Grain Civic

Posted By: civic95vtec
Subject: Wood Grain Civic
Date Posted: January 26, 2005 at 8:20 PM

I have a 95 Civic Coupe EX, and I am planning on doing a custom FG dash mold to put a in-dash TV monitor and 6 CD Changer. But I want to finish it off with wood grain. How should i go about doing the wood grain finish?

-------------
Tommy V.

Replies:

Posted By: doc t
Date Posted: January 27, 2005 at 5:44 AM

should be able to find some material at home depot that would work. i would make a template of were the wood is going out of construction paper, then trace and cut it out of you wood stock then glue it in place. there is some stuff on the market that is a 1/16 in. thick and easy to bend over edges....just be carefull.

-------------

All Bleeding stops.....eventually!

Print Page | Close Window