73 Cutlass dash repair

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48910
Printed Date: May 08, 2025 at 3:05 AM

Topic: 73 Cutlass dash repair

Posted By: secureauto
Subject: 73 Cutlass dash repair
Date Posted: January 30, 2005 at 12:10 AM

I'll be installing a deck into a 73 Olds Cutlass, a previous installer cut a din sized hole in the dash where the original 2 knob was. My problem is, there's a half moon shaped hole on the side of the din sized hole, what can you guys suggest to cover it up with?
Bondo, Duramix?

-------------
ASE Certified

Replies:

Posted By: realitycheck
Date Posted: January 31, 2005 at 7:35 AM

Well Im not completely sure what you're saying but I guess you could use duramix and some abs plastic. I'm not sure what kind of hole your talking about though.

-------------
Learning the trade one fiberglass creation at a time!

Print Page | Close Window