Print Page | Close Window

Stuck between fiberglass and a hard spot

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49637
Printed Date: May 21, 2024 at 6:52 AM


Topic: Stuck between fiberglass and a hard spot

Posted By: Schimmel03
Subject: Stuck between fiberglass and a hard spot
Date Posted: February 08, 2005 at 11:02 AM

Well, I just got done laying 2 layers of fiberglass in my spare tire well and when I tried to pull it out of the trunk it is stuck to the tape and won't come out. Any ideas on what I can do to get it out? Thanks!

Eric



Replies:

Posted By: oonikfraleyoo
Date Posted: February 08, 2005 at 12:14 PM
If the tape wont come out with it I can't think of any way to pull it out without damaging it



Posted By: 97Avalonxls
Date Posted: February 08, 2005 at 12:26 PM
if you can, spray a little wd40 under the glass you've layed, let it sit overnight and possibly the next morning some of the tape's adhesive should have given way. try to apply pressure evenly around the edges looking for any give, that where to spray your wd. good luck 



Posted By: realitycheck
Date Posted: February 08, 2005 at 1:54 PM
Also if you have an air compressor getting air underneath it makes it pop out. 

-------------
Learning the trade one fiberglass creation at a time!



Posted By: Schimmel03
Date Posted: February 08, 2005 at 5:05 PM

Thanks for the info! The WD-40 idea worked. Made a bit of a mess, but it worked. Thanks again for the help!

Eric


Print Page | Close Window