Using a tarp to fiberglass?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51422
Printed Date: May 14, 2025 at 6:05 PM

Topic: Using a tarp to fiberglass?

Posted By: spoontek
Subject: Using a tarp to fiberglass?
Date Posted: March 06, 2005 at 6:09 PM

Has any1 attempted to or tried using a trap to fiberglass a mold instead of tape?

-------------
Speed Kills!
Vancouver ricer!
If I marry a Surrey girl. Do I have to pay her for services rendered?

Replies:

Posted By: spoontek
Date Posted: March 06, 2005 at 6:12 PM

i meant tarp. Not trap. :)

-------------
Speed Kills!
Vancouver ricer!
If I marry a Surrey girl. Do I have to pay her for services rendered?

Posted By: oonikfraleyoo
Date Posted: March 06, 2005 at 6:17 PM

If you can get it to lay good and flat it should work. It might be harder to get loose. I would also tape it down to keep it from moving. I have never tried it though.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: JMAN1980
Date Posted: March 11, 2005 at 9:46 PM

aluminum foil works great.

Posted By: slociv
Date Posted: March 12, 2005 at 2:47 PM

Yeah aluminnum foil or tape. Why don't you like using the tape?

-------------
-SloCiv

Posted By: Stanford1621
Date Posted: March 14, 2005 at 6:01 PM

I used a plastic cup to mix some resin in and it ate right thru it, try some to see if it will hold up.

Print Page | Close Window