Print Page | Close Window

Glass question

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51602
Printed Date: July 07, 2025 at 11:01 PM


Topic: Glass question

Posted By: eedukes
Subject: Glass question
Date Posted: March 09, 2005 at 8:38 AM

Where can I buy Fiberglass resin and Hardener. Also, I am just glassing over MDF. So, I don't need additional support or strengthening. Do I still need fiberglass mat or will just coating my fleece in the resin work?



Replies:

Posted By: auex
Date Posted: March 09, 2005 at 9:55 AM
Why would you use fleece to go directly over mdf??? That makes no sense.

What are you trying to do?

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: eedukes
Date Posted: March 09, 2005 at 10:00 AM
I am building a sub enclosure and an amp rack out of MDF as I always do. However, usually, I carpet them. This time I want to fiberglass them so I can paint them to a shiny finish.




Posted By: realitycheck
Date Posted: March 09, 2005 at 11:50 AM
I wouldnt even worry about putting fiberglass in it. I would just put a couple coats of resin on it so it will be smooth, then sand, primer, paint. Or you could just put bondo on the wood and sand and paint it. IMO, the resin will be easier cause you can just paint it on, and it should not have any bubbles or prep work to it.

-------------
Learning the trade one fiberglass creation at a time!




Posted By: realitycheck
Date Posted: March 09, 2005 at 11:53 AM
you can buy resin at lowes. Or any auto body supply store.

-------------
Learning the trade one fiberglass creation at a time!




Posted By: eedukes
Date Posted: March 09, 2005 at 11:59 AM
Appreciate it. That is exctly what I needed to know. What type of resin. I know I can buy fiberglass resin at a boat supply store for 15.00 a gallon. Will that do it?




Posted By: realitycheck
Date Posted: March 09, 2005 at 1:17 PM
Yeah man that should work no problem.

-------------
Learning the trade one fiberglass creation at a time!





Print Page | Close Window