I was orginally building a sealed enclosure and I was recommended two Eclipse 10", but I decided to go ported. I have exactly 2.06cu,ft in a custom 3/4 MDF box made for a pair of 10"(interior mounted). The interior is mirrored plexi(no fill),and the front is 3/4 plexi. I am using two fosgate 500s amps which will push 500w into 4 ohms. type of music will be mainly rock and hiphop.
I need speaker recommendation.
Port length and diameter.
-------------
chas
i think it would be easyer if you norrow it down to the brands you like, and then check the spec of the subs.
like i know for a fact that rockford fosgate has subs that only requier between 0.75 and 1.5 FT3.
10" subs are usualy very good for rock, and it beeing a ported box with 2 10" it should be greate for hiphop.
later.
i think it would be easyer if you norrow it down to the brands you like, and then check the spec of the subs.
like i know for a fact that rockford fosgate has subs that only requier between 0.75 and 1.5 FT3.
10" subs are usualy very good for rock, and it beeing a ported box with 2 10" it should be greate for hiphop.
when it comes to port lenght and diameter first you need to select the sub look at the spec's and then you get the port dimentions. well at least i think!!!
later.
Well i'm really likeing Alpine type R's lately, i've only heard the 12's but the tens should be just as good.