Fiberglass Door panels

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52954
Printed Date: May 07, 2024 at 5:08 AM

Topic: Fiberglass Door panels

Posted By: racer427
Subject: Fiberglass Door panels
Date Posted: March 31, 2005 at 7:55 PM

Hey guy's,

Yes but, another post. Like Ya need to hear from me Again! HA HA! Anyway, on to the topic.

I am in the process of building the Pods for my doors and I am in need of suggestions on how I should Finish them ? I am not very good with Fabrics or trying to get carpets to hug the curves nicely. On the other hand, I don't have alot of time to do the bondo thing and I really don't want to paint them. Any suggestions would be Appreciated.

Chris
posted_image

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds

Replies:

Posted By: djdaveoc
Date Posted: March 31, 2005 at 8:46 PM

From what I can tell you really don't want to do any of the finishing options yourself. Since you don't have the time, if you have some money, you might as well pay someone to do some work for you.

-------------
posted_image

Plan, Research, Do

Posted By: ravenndude
Date Posted: March 31, 2005 at 11:10 PM

try searching for flock maybe? I'm not sure if the surface has to be smooth for that or not.

Posted By: oonikfraleyoo
Date Posted: March 31, 2005 at 11:38 PM

For flock the surface should be smooth but it doesn't have to be smooth enough to paint. I haven't used it in a car yet but I have been playing with it and its cool stuff. Very easy too.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.