Print Page | Close Window

trunk setup, don’t know where to start

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53393
Printed Date: May 03, 2024 at 7:44 AM


Topic: trunk setup, don’t know where to start

Posted By: robfontelera
Subject: trunk setup, don’t know where to start
Date Posted: April 06, 2005 at 12:53 PM

i have a 1998 toyota corolla.  right now i have a box for a 12" rockford fosgate hx2 sub and a kenwood amp.  i want to redo my whole trunk just for this setup, but build everything from scratch.  i want it to look all custom instead of a box and an amp bolted onto the floor.  i want to still keep the spare tire, just in case, but i don't know how to start off. 

can any1 suggest a drawing and how to start building. 




Replies:

Posted By: realitycheck
Date Posted: April 06, 2005 at 1:43 PM

Here you go man,

Thats a tc, but its a good install for one subposted_image



-------------
Learning the trade one fiberglass creation at a time!




Posted By: robfontelera
Date Posted: April 06, 2005 at 1:52 PM

do you still have your spare?

nice......that's hella clean!





Posted By: realitycheck
Date Posted: April 06, 2005 at 2:45 PM
Thats not mine thats a guys off of a forum I read.  I dont know if he still has his spare but it can be built to still house your spare in there.  You will just have a really high false floor.  I would suggest making the box more flat and rectangle instead of square. I could be completely wrong in this though.

-------------
Learning the trade one fiberglass creation at a time!




Posted By: robfontelera
Date Posted: April 06, 2005 at 2:58 PM
hey, it's a clean setup.....i was planning on doing a more rectangular box for the sub and turning the sup inside out to show the basket, at least that way there will be a little more room in the box....thanks for the idea thoght.




Posted By: realitycheck
Date Posted: April 06, 2005 at 3:42 PM
Good ideas man, you going with that?

-------------
Learning the trade one fiberglass creation at a time!




Posted By: robfontelera
Date Posted: April 06, 2005 at 3:51 PM

yeah.....i just have to measure everything out in the trunk, so i can set room for an amp rack.....at least i have an idea of how a trunk looks when done right.....

thanks.





Posted By: realitycheck
Date Posted: April 07, 2005 at 8:20 AM
Hey man post pics?

-------------
Learning the trade one fiberglass creation at a time!




Posted By: robfontelera
Date Posted: April 07, 2005 at 9:07 AM
i sure will...i'll do a step by step thing.  i'll start next paycheck so i can buy everything i need.





Print Page | Close Window