Spare Tire Well Fg Enclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53729
Printed Date: May 21, 2024 at 4:30 AM

Topic: Spare Tire Well Fg Enclosure

Posted By: racer427
Subject: Spare Tire Well Fg Enclosure
Date Posted: April 11, 2005 at 7:26 PM

Hey guy's,

Gonna start working on my next project here soon and I need some input. I am going to do a spare Tire well enclosure in my 84 Lumina Euro that will hold 2 10" subs and a few amp racks. I know the normal proceedure is tapping, foil, resin, glass, dry, glass, dry Ect. My main concern is the framing. ANyone have any links to any sites that deal with this type of an enclosure or have any of You delt with one in the past?

Chris

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds

Replies:

Posted By: John64
Date Posted: April 11, 2005 at 7:33 PM

Is this what you mean by framing?

posted_image

check out my site for more pics and info, https://www.cardomain.com/memberpage/448049/5

vote for me if you have the time.

Posted By: racer427
Date Posted: April 11, 2005 at 7:41 PM

Well, that is close just a little off track for my project as I am using the whole spare tire well.

Chris

Posted By: One_Dieu
Date Posted: April 11, 2005 at 9:06 PM

John64 do you ever have problems with air bubbles when you use chop mat? Also how do you stiffen up the inside of the box?

-------------
Respect the Blood Line

Posted By: racer427
Date Posted: April 11, 2005 at 10:35 PM

What I am really looking for are some pic's to reference. And It is a 94 Lumina Euro not an 84. Uhg!!!.

Chris

Posted By: oonikfraleyoo
Date Posted: April 11, 2005 at 10:49 PM

looked at HzEmall.com yet?

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: racer427
Date Posted: April 11, 2005 at 11:02 PM

Just Did, nothing there close to what I am about to trample into.

Chris

Posted By: realitycheck
Date Posted: April 12, 2005 at 7:53 AM

Man hzemall has everything! Can you elaborate a little more for us on what you want so we can help you?

-------------
Learning the trade one fiberglass creation at a time!

Posted By: racer427
Date Posted: April 12, 2005 at 10:06 PM

I am just looking for some step by step pics of a spare tire well enclosure. I just need some Ideas to help me alonge with the project.

Chris

Posted By: ravenndude
Date Posted: April 12, 2005 at 10:57 PM

is this what you are talking about?

https://homepages.ihug.co.nz/~wradford/welbuild.htm

its the same as John64's but this one's flush with the ground.

Posted By: racer427
Date Posted: April 13, 2005 at 9:53 PM

That pretty close. I just need to see some various installs centered around the well to give me a few ideas as to how I want to proceed with it.

Chris