Box dimension question.

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54357
Printed Date: May 14, 2025 at 3:29 PM

Topic: Box dimension question.

Posted By: hoking
Subject: Box dimension question.
Date Posted: April 21, 2005 at 12:03 PM

Hi Guys,

i was wondering about box dimensions.
Say my sub from mount to bottom of magnet is 7". If i built my box to 6.75" high, after mounted, it will have 0.5" from the magnet to the board. (.75" MDF) Is that ok? Or is there a specific gap im' suppose to leave?

Thanks

-------------
Michael Chan
04' Subaru Forester 2.5XS
Compustar 2W8000FMR
Alpine SWR-1241D
Alpine MRD-M500

Replies:

Posted By: John64
Date Posted: April 21, 2005 at 1:57 PM

1" is nice, but space is space is space. Better cooling.

Posted By: hoking
Date Posted: April 21, 2005 at 2:01 PM

-------------
Michael Chan
04' Subaru Forester 2.5XS
Compustar 2W8000FMR
Alpine SWR-1241D
Alpine MRD-M500

Posted By: rhdAndy
Date Posted: April 23, 2005 at 6:42 AM

WHICH IS IT .25 OR .5?

Print Page | Close Window