pics of glass work
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55153
Printed Date: May 05, 2024 at 9:21 AM
Topic: pics of glass work
Posted By: jeffmor
Subject: pics of glass work
Date Posted: May 04, 2005 at 9:08 PM
I built my friend a center console for his dodge dakota he wanted a 12" tv up front and a 7" tv in rear plus i decided to make it a custom box for two 8" subs and also put in a frosted plexiglass switch panel and plexi rods that were frosted and all lit up with blue neon mostly cold cathode then i primed and painted it to match his truck came out awesome please tell me what you think ------------- MECP cetified installer
Owner of Audio Visions
Replies:
Posted By: spootydlux4
Date Posted: May 04, 2005 at 10:54 PM
thats pretty damn sweet, im might tackle sumthin like that pretty soon, but do you have any more construction pics? i bet its pretty hard to see that screen with all that bright ass neon though
-------------
blah blah blah blah
Posted By: ss-installer
Date Posted: May 04, 2005 at 10:58 PM
nice....how long have you been doin glass?
-------------
Posted By: oonikfraleyoo
Date Posted: May 04, 2005 at 11:11 PM
I'm not a huge fan of neon, but it looks pretty tastful in this setup, even though there might be a bit much. Nice work. ------------- Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.
Posted By: jeffmor
Date Posted: May 05, 2005 at 9:33 AM
The neon isnt that bright the camera just blurs it really bad plus my friend is a neon freak ive had to put it everywhere for him but to each his own. I have been doing glass work over a year i will have some more pics of stuff up soon thanks for the comments
-------------
MECP cetified installer
Owner of Audio Visions
Posted By: r0yal
Date Posted: May 05, 2005 at 12:45 PM
yea, looks wicked, good job man!
Posted By: OCURIEL
Date Posted: May 06, 2005 at 10:55 AM
very nice work!
Posted By: MAYHEM_AUDIO
Date Posted: May 15, 2005 at 2:21 PM
what king of screen is that ------------- MATT
Posted By: jeffmor
Date Posted: May 22, 2005 at 4:36 PM
it is a 10.4" flipdown monitor i just took it apart and used the screen itself along with the front shroud of the tv. it is made by mobile entertainment solutions i got it off ebay for around 250 bucks
-------------
MECP cetified installer
Owner of Audio Visions
Posted By: drsnoze
Date Posted: May 22, 2005 at 7:37 PM
what did you use to mold from the tv to the mdf. How did you attach it?
Posted By: jeffmor
Date Posted: May 28, 2005 at 12:42 PM
i used super glue with an activator to get the bezel of the tv attached to the wood then i fleeced the entire console then came the bondo
-------------
MECP cetified installer
Owner of Audio Visions
Posted By: jeffmor
Date Posted: May 30, 2005 at 11:34 PM
this is my newest project its about 50% finished it still needs a little bondo, paint, plexi and viynl but its beginning to take shape it consists of 2- 12" w3's, 2-8" w3;s, 2-kenwood excelon amps all kenwood excelon mids and highs it and in the trunk lid it has a 12" tv and 2 6.5" excelon speakers i expect it to be done at the end of june so keep checking back and let me know what you think https://community.webshots.com/album/338655935yuBoPJ?990 ------------- MECP cetified installer
Owner of Audio Visions
Posted By: One_Dieu
Date Posted: May 31, 2005 at 11:52 AM
How long have you been working woth FG? I think when it is said and done it's going to look real clean. Keep us posted. ------------- Respect the Blood Line
Posted By: jeffmor
Date Posted: June 03, 2005 at 12:53 AM
i have been doing glass work for over a year now its still is missing a trim plate that goes over the box for the eights but it is coming along
-------------
MECP cetified installer
Owner of Audio Visions
|