3d sander?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55387
Printed Date: May 10, 2025 at 8:18 AM

Topic: 3d sander?

Posted By: lilbenny
Subject: 3d sander?
Date Posted: May 08, 2005 at 10:37 PM

anyone use sears 3d sander?

https://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00911633000

i would think it would make the job A LOT easier using this if it worked... good for curves and angles.. any one use this?

Replies:

Posted By: branvw
Date Posted: May 09, 2005 at 11:03 AM

i used one just like it and i went back to an orbital. they dont seem to do a fast job and the pads are alot more money

Posted By: lilbenny
Date Posted: May 09, 2005 at 5:38 PM

but can the orbital sander reach the areas with curves?

Posted By: kps67
Date Posted: May 09, 2005 at 11:26 PM

i have one. i have not been able to use it on fiberglass just yet because i have not to long ago started to learn how to fiberglass but i do use it when i am sanding bondo getting ready to for the final preparations and all my curves are sanded to my specifications and it does an excellent job.i picked up one for $20 at sears and i am very pleased

Posted By: branvw
Date Posted: May 11, 2005 at 3:04 PM

it can you just cant push to hard or it will make a flat spot, you just smooth by hand

Print Page | Close Window