vinyl glue?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55676
Printed Date: May 11, 2025 at 5:23 AM

Topic: vinyl glue?

Posted By: wotugot4me
Subject: vinyl glue?
Date Posted: May 13, 2005 at 3:54 PM

Hi guys and gals

what is the best glue to use for sticking pvc/vinyl to wood and fibreglass? Is a standard contact adhesive good enough or will the chemicals in the glue harm the vinyl? I used a spray adhesive and after a few days the vinyl came unstuck from the fibreglass and wood. Any ideas?

Replies:

Posted By: deocder
Date Posted: May 28, 2005 at 12:11 AM

Yes, use contact cement. It is available at home depot, lowes, etc. They is a red can and a green one, use the red. The spray on (3M)adhesives tends to come loose over time.

-------------
WTB: Black Leather Acura GSR seats

Posted By: racer427
Date Posted: May 28, 2005 at 8:00 PM

Use 3M #90. Spray both the surface that the vinyl is being applied to and the back the vinyl itself. Let it sit for a few minutes before adhearing the vinyl.

Chris

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds

Print Page | Close Window