How to Get Rid of the Little Pits?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56782
Printed Date: April 24, 2024 at 5:35 PM

Topic: How to Get Rid of the Little Pits?

Posted By: 1sic88hatch
Subject: How to Get Rid of the Little Pits?
Date Posted: May 31, 2005 at 10:59 PM

Ok here the deal, I build my enclosure already but I cant get rid of the little pits left over. I want them gone so I can paint it. this is a podded enclosure made for the spare tire well.

posted_image

the smooth part is going to be the only part showing. the rest will be covered with carpet.

-------------
1 bad azz civic....Its Murda!!

Replies:

Posted By: auex
Date Posted: June 01, 2005 at 11:16 PM

Glazing putty.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: ajgonzales
Date Posted: June 01, 2005 at 11:29 PM

auex]G wrote:

azing putty.

but not that bondo stuff that comes in the orange tube... that stuff is no good.

Posted By: auex
Date Posted: June 01, 2005 at 11:31 PM

Now that I think about it, if the holes are small then high build primer would help as well.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: lilbenny
Date Posted: June 03, 2005 at 12:27 AM

what glazing puddy?

Print Page | Close Window