Print Page | Close Window

custom headliners?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57131
Printed Date: May 04, 2024 at 7:09 PM


Topic: custom headliners?

Posted By: 1sic88hatch
Subject: custom headliners?
Date Posted: June 05, 2005 at 10:56 PM

Hey I was wondering if anyone new how to do custom headliners. Im trying to do the 3d flame look. If there is anyone let me know. thanx

-------------
1 bad azz civic....Its Murda!!



Replies:

Posted By: soundzplus
Date Posted: June 05, 2005 at 11:06 PM

We do em All the time ...

Doesnt really matter what u r covering it with ..

The Raised Flame look can be done with simple trunk liner / box carpet.. - cut out the pattern you want .. then go over it with the finish matl of your choice - 

We normally do em all in Suede ... Comes out killer

We use Volara Foam..

Hope this helps ..





Posted By: auex
Date Posted: June 05, 2005 at 11:13 PM
I like suede. I just need to find some extremely good glue. Damn AZ heat.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: 1sic88hatch
Date Posted: June 06, 2005 at 12:28 AM
Thanx for the info. I just need to know if 3m adhesive spray glue will work? thanx

-------------
1 bad azz civic....Its Murda!!




Posted By: vinje76
Date Posted: June 10, 2005 at 2:41 PM
Get the 3M Super 90 Adhesive spray. That stuff works good in cold/hot climates.

-------------
"That hit me like a kick in the nuts!"





Print Page | Close Window