Print Page | Close Window

My First 1st Class F/G Project

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57507
Printed Date: May 10, 2025 at 9:25 PM


Topic: My First 1st Class F/G Project

Posted By: 1rstClassSC
Subject: My First 1st Class F/G Project
Date Posted: June 11, 2005 at 9:29 PM

Check this out people, this is my first Fiberglass project. I learned from watching my buddy do it and allot of research . It is a 15" touchscreen LCD with Pentium 4 Computer.

posted_image

posted_image

posted_image

posted_image

posted_image

What do you guys think.




Replies:

Posted By: abovestock
Date Posted: June 11, 2005 at 11:59 PM
That looks real sharp, also very clean. Keep up the awesome work.



Posted By: oonikfraleyoo
Date Posted: June 12, 2005 at 12:07 AM
Wow, that makes my Lilliput look tiny.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.



Posted By: 1rstClassSC
Date Posted: June 12, 2005 at 1:28 AM

Thanks, This is a list of everything that this truck will sport:

15" LCD Touchscreen Computer

4 X162S Component sets

2 T142C Coax sets

4 T115D2 subwoofers

1 20001bd For Lows

1 8004bd for highs

1 CPCC2 100 Farad Cap

1 CPSR System Regulator

1 RAVDVD2 DVD 7" in-dash Unit

2 Optima Yellow Top Batteries

26" Zenetti Wheels

And Im not sure how many TV's im going to get.

Luis




Posted By: 1rstClassSC
Date Posted: June 13, 2005 at 10:47 PM

Also does anyone know what I can use to make bondo stick to plastic?

Luis




Posted By: abovestock
Date Posted: June 20, 2005 at 12:36 AM
clean the piece, sand a lot with 220, clean again, and then a layer of metal glaze to "prime" it for bondo


Print Page | Close Window