I'm new, how much resin do i need?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58030
Printed Date: May 03, 2025 at 3:52 AM

Topic: I'm new, how much resin do i need?

Posted By: whitebread
Subject: I'm new, how much resin do i need?
Date Posted: June 19, 2005 at 3:02 PM

im just starting my project and was wondering how much resin do i need i want to make one to fit in the little section corner in my trunk like this one
posted_image

i went to wal-mart only cause its close and i seen they have some stuff there and bought some fleece and a net wt of 2lb 3oz can of resin and comes with hardener for it would this be enoght or do i need to grab up some more.

thanks everyone for your time

Replies:

Posted By: j68rh
Date Posted: June 19, 2005 at 4:05 PM

I am the one that did that project. If I was you I would another can to do the project. Also make sure you measure out right. for every 4oz you use, use 1/4 tsp of hardner. for going over the fleece thin out the resin a little with acetone. when you mix the resin for the fleece I used 10oz of resin and 2 oz of acetone and 3 (1/4) tsp of hardener. In a couple of days after I put the box in the car I will post a finished picture of both boxs the one for the sub and the one for the amp.

Posted By: whitebread
Date Posted: June 19, 2005 at 7:26 PM

thanks for the info

Posted By: whitebread
Date Posted: June 19, 2005 at 7:38 PM

o one more thing when you say acetone is it pure acetone or can you use nail polish remover acetone

thanks again

Posted By: oonikfraleyoo
Date Posted: June 19, 2005 at 8:08 PM

You might use nail polish remover, but acetone from lowes would be alot cheaper and better

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: whitebread
Date Posted: June 19, 2005 at 8:23 PM

k so i just put my first layer on should it feel like its getting real hot or did i do somthing wrong

Posted By: j68rh
Date Posted: June 19, 2005 at 9:10 PM

no your right it will feel like its real hot to the touch and then when it fully cures it will be cool to the touch and hard

Posted By: oonikfraleyoo
Date Posted: June 19, 2005 at 10:15 PM

If it's really hot, maybe use a tad bit less hardener next time. Too much hardener can make the final product brittle. There should be some heat from the chemical reaction though.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: j68rh
Date Posted: July 05, 2005 at 7:25 AM

hey are you done with the project? I would like to see your progress

Posted By: whitebread
Date Posted: July 11, 2005 at 9:24 PM

ill put up some pictures soon i stoped right now just cause i was thinking of getting some new subs and the box was for one so i might turn it in to an amp rack and make a new one on the other side of the trunk