Trim question?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59424
Printed Date: July 01, 2025 at 5:22 PM

Topic: Trim question?

Posted By: rob_25
Subject: Trim question?
Date Posted: July 14, 2005 at 1:32 PM

I have a question on what size mdf, or are people using something different such as panel board to trim up there enclosures for example If I were to hide my amp in the spare tirewell under a false floor with a hole cut out w/ plexi?

Replies:

Posted By: placid warrior
Date Posted: July 14, 2005 at 2:24 PM

1/2" - 5/8" MDF for large flat areas to avoid flexing, but for something that isnt going to be holding any weight such as a FG cover u can use anything u need to use to get the shape.

Print Page | Close Window