FIBERGLASSING DOOR TRIM PANELS
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59562
Printed Date: May 01, 2024 at 5:44 PM
Topic: FIBERGLASSING DOOR TRIM PANELS
Posted By: 916k
Subject: FIBERGLASSING DOOR TRIM PANELS
Date Posted: July 16, 2005 at 6:44 PM
OK to start off i would like to say that getting rid of the old vinyl on these doors is a pain in the a**,.... ok now that i got that out of the way, i would like to know if i should do the whole masking tape thing on these doors or not,& if you can tell me what to do next , ..........all i want these doors to look like is to have that fiberglass, gloss finish, after paint and everything... i am want the same stock design just fb'ed....
-------------
916k
Replies:
Posted By: Poormanq45
Date Posted: July 16, 2005 at 9:11 PM
eek, you took the vinyl off already? YOu may have gotten away with just using bondo on it to smooth it out then sand it, then primer and paint it. That would be alot easier
-------------
|