Custom Dash Question?
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59588
Printed Date: May 16, 2024 at 11:07 AM
Topic: Custom Dash Question?
Posted By: stuntjester1
Subject: Custom Dash Question?
Date Posted: July 17, 2005 at 11:20 AM
Ok I read up on all the stuff about make a dash, and started. As read I got some 1/2 MDF to make the sub-framing. But when I cut the top part of the dash, I can not get it to flex so it fit the stock curve of the dash to the window. I want the top to be flat and just come straight out from the windshield back and then drop down. Should I go get some 1/4 type of plywood to do this or can I do something to the MDF to make it work? I can probly force it to where i want it, but I dont thing when i get down figerglassing and everything that when i pull the dash to paint it that it flex it back out??? Any help is much needed
Replies:
Posted By: ss-installer
Date Posted: July 17, 2005 at 11:27 AM
maybe try some 1/4 masonite.
-------------
|