Trim rings?
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59687
Printed Date: May 15, 2024 at 7:02 AM
Topic: Trim rings?
Posted By: abovestock
Subject: Trim rings?
Date Posted: July 19, 2005 at 1:30 AM
Ok all it boils down to is I need trim rings to finish my wifes fiberglass sub box. As luck would have it nobody sells what I need and to have it made EVERYBODY in Cincinnati wants $45.00-$60.00 to make them. What I am looking for are 2 rings to flush out a single 12" Alpine type R sub. Can any body make them for me or tell me where to get them for a reasonable price(under $20.00). I don't have the propper equipment to make them myself. Somebody please help me!
Replies:
Posted By: Master Asylum
Date Posted: July 19, 2005 at 2:38 AM
I'm in Lebanon(North of Cincy). If you don't have the equip, you'll prolly have to pay the money. Otherwise maybe see if a hardware store can do it but it'll prolly cost similar if even able. If you are doing this as a rare hobby, just pay I'd suggest. If its gonna be a repetitve thing I'd suggest dropping the money for the basic equip as an investment. :) Otherwise I might be able to help ya out getting a router to make them if you can get up here. The boss at work has a bunch of toys I can borrow as long as I believe you are competent enough to use em. :)
-------------
1998 Monte Carlo w/
Eclipse CD8454
2xRockford 5.25" Power 2-way T152C
2xRockford 6"x9" Punch 3-way FRC4369
1xMemphis 16-MCH1300 5-channel
2xKicker 12" L5 Solobaric-2 Ohm
Posted By: playr747
Date Posted: July 19, 2005 at 9:25 AM
What thickness MDF? and what Inside Diameter size? What outside Diameter size? How many?
Posted By: abovestock
Date Posted: July 19, 2005 at 12:27 PM
I had another post listed on buy and sell equipment, but now it is gone. Oh well. I am looking foe something along the lines of
1)ID 10 7/8 by OD 13 1/2
2)ID 12 1/2 by OD 13 1/2
If you could make these for me out of 1/2 inch MDF please PM me. They must be as perfect as humanly possible. Thank you.
Posted By: abovestock
Date Posted: July 19, 2005 at 12:29 PM
Oh yea, I only need one of each. I do have a Roto zip but not nearly accurate enough and a pain in the butt to operate as a router.
Posted By: abovestock
Date Posted: July 20, 2005 at 11:49 PM
Please somebody help me I am going crazy!
Posted By: abovestock
Date Posted: July 23, 2005 at 2:03 AM
Never mind I got it to work.
|