Print Page | Close Window

Liquid Plastic

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59786
Printed Date: May 12, 2025 at 6:27 PM


Topic: Liquid Plastic

Posted By: live42day
Subject: Liquid Plastic
Date Posted: July 20, 2005 at 7:59 PM

I just got my order of Liquid Plastic and Icing from hzemall. For whoever has used it, I need to know how much of the cream hardener to mix with the Liquid Plastic and the Icing(filler.)

Thanks



Replies:

Posted By: Poormanq45
Date Posted: July 21, 2005 at 8:57 AM
Are there any basic mixing instructions on one of the containers?

Most likely it's similar to bondo.

-------------



Posted By: live42day
Date Posted: July 21, 2005 at 12:39 PM
No. The containers are just plain. I was just curious how to mix them because it is a new product to me.



Posted By: WILL85IROC
Date Posted: July 22, 2005 at 2:08 PM
u may have to cl the company where u bought it....   should be some form of directions on paper or in the packaging...  good luck....

-------------
" WILL85IROC "



Posted By: behmer
Date Posted: July 22, 2005 at 4:06 PM

So you got this directly from them?  I just finished looking at every documented install on their site and at the end concluded I need that stuff too..  I would also be interested in the results of mixing.  To get this should I just call them directly?  Thanks for any info..  My dash/door/console fabrications will be starting next week so I need to get on this liquid plastic stuff.  Looks like a life saver.

-Sean B


Print Page | Close Window