Print Page | Close Window

is it necessary coat a layer or two on inside?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60189
Printed Date: May 04, 2024 at 5:40 AM


Topic: is it necessary coat a layer or two on inside?

Posted By: bsinnest
Subject: is it necessary coat a layer or two on inside?
Date Posted: July 27, 2005 at 10:22 AM

Hey, i was just wondering if it is really necessary to try to coat a layer or two on the inside of the encloser. I have the holes for the subwoofer cut out and could possibly get some of it, but am positive that i won't be able to get it all covered in the inside.

Thanks for the help.



Replies:

Posted By: oonikfraleyoo
Date Posted: July 27, 2005 at 10:59 AM
As long as you have enough layers, it doesn't matter if they're inside or out.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.



Posted By: placid warrior
Date Posted: July 27, 2005 at 1:43 PM
if u want though some areas worth trying to get to are where the fleece meets the MDF and around the MDF sub ring, just adds that much more strength to those areas.


Print Page | Close Window