4 l5 with 3 jbl amps

Heres what i plan on doing, to 15" l5s and 2 10" l5s with 3 jbl amps, a 4400(for 15s) a 2200 (for 10s)and a 4ch for the highs. This is all going in the back of my 94 chevy blazer and im now in the stage of laying down sound deadener. and i was tryen to get some new sweet looking ideas, but thats why i came here, so if you have a sweet idea or have a pic of some sweet fiberglass project, i would like to see it, i cant wait to get this startedm but i also want it to look like trully 1 of a kind and something out of this world, i also have a ton a neons i plan on "hiding" so it all glows at night. so let me know if you have any ideas. I will post pics of the progress that i make.

-------------
hmmm.... was that the right wire?

Clif go here and see if you see anything www.hzemall.com  Go to the gallery section.

-------------
Learning the trade one fiberglass creation at a time!

I wouldn't recommend using 2 different size subwoofers.  You tend to get a lot more standing waves and cancelation, and it is harder to tune when using two different size woofers.

-------------
Good Luck!
-Thad

i dont plan on using them both at the same time, th 15s for when im listening to rap and that kind of music, and the 10s for rock and other kinds of music that need a quicker response.

-------------
hmmm.... was that the right wire?

check out the web site, got some ideas, but here is the progress so far. ripped everything out and put some sound deadener down then put everything back together.

Overall look of it


Had a few extra sheets so i threw them on the hodd liner.


And the final product.


All that work and nothing to show for it, it took about 3 hours to do not including the tailgate. I plan on starting the base of the fiberglass maby saturday or monday, i got a few more ideas of what im going to do but not to shure.

-------------
hmmm.... was that the right wire?

Scence it has been awile scence i have done some fiberglassing i decided to make some kick pannels for some component speakers, and i also decided to get some hood scoops and fiberglass them on and give them a little custom look. I will have pics of the hood scoop and the kick pannels ( or the work in progress that they are) by next sunday, got to work all week, bummer...... but today i got some done, put all new window motors in, scence my old ones were shot, now my windows go up and down without stoping...... what a heartache that used to be. But i will post another update next sunday, maby i will start doing it on a weekly basis to show the progress.... maby well im out for now cya all later.

-------------
hmmm.... was that the right wire?

got a little more done, almost finished with 1 kick pannel, still waiting to get my hood scoops in the mail. But this kick pannel turned out nice, needs a little more putty work, but thats for another day. few pics.......

Kick pannel is balancing on a block of wood as i cant screw it down till i cut the holes out, and i cant do that till i know what components im going to stick in there. Still nothing done yet with the main fiberglass box in the back, im still waiting on some wood. hope to have it this weekend. Till then, im out.

-------------
hmmm.... was that the right wire?

try to reduce the resolution of the pics, very difficult to appreciate them. as soon as you start your project, post pics of the progress.

yea i was going to make them smaller but i did not have time, i will repost them later of them smaller.

-------------
hmmm.... was that the right wire?

smaller pics






That looks a little better. but like i said i still need to do a bit more work, not to worried about the rings to much as the majority of it will be covered up and cut out. but i should have more progress done by sunday. I will post some more pics of what i got done. till then im out.

-------------
hmmm.... was that the right wire?

Good job clif, way to keep the progress going man. You seem like me once I start a project im in such a hurry to finish it. I just cant wait to see the finished product.

-------------
Learning the trade one fiberglass creation at a time!

Did you paint b4 you cut your holes?

yea u dud paint them first, i got to redoo the one kick pannel so it looks a little better. but i will just primer it then cut the holes then do the final paint on it. i am starting the other kick pannel today i think im going to do this one a bit diffrent, like mold it right to my kickpannel plastic piece, that way it will look more stock. i will post more pics of the progress i get today, i plan on almost compleating the other kick pannel today. i will post pics of step by step and not just final product. be back in a few hours or so.....

-------------
hmmm.... was that the right wire?

glad i can spaell, change both begining "u"s to "i"s so its "yea i did paint them first"

-------------
hmmm.... was that the right wire?

Good luck on the new kick panel. I dont think i will ever put any kick panels in my vehicle, i would end up kicking the sh*t outta some nice craftmanship.

yea the mouse trap was to ballence it beacuse i cant screw it down yet.... so i grabbed what i could find. but as for the other kick pannel. I did this one a bit diffrent, molding it right to the factory plastic kick pannel. here are the steps and how far i have got.

Basic Supplies that i used, hot glue cloth, and some strong copper wire.

first pic of the rings mounted

a test fit to see if it looks good

a pic of it clothed in place,


almost looks like the e brake is hitting it but it has about a 1/4th of an inch all the way threw its travel, guess i have to put my e-brake on with my hand from now on...

Might do some more work tomarow dont know yet.. later....

-------------
hmmm.... was that the right wire?

well im still waiting for some wood so i can start my project for the 3 jbl amps and the 4 l5s, but i have gotten alot of ideas, i got a sweet idea for the amp racks that i think will look sweet. But heres what i have been doing in the meen time. Make this box for my brothers 2000 impalla maken this for his birthday. almost done with it, just a bit more sanding on half of it and paint and thats it. Also if anyone is intreseted i got a box for 3 12s that fits a 2000 to 2002 impalla, this will fit more then just that car, i know if fits a newer taures.. if if you are intrested let me know, im looking for 100 bucks. its a fiberglass box that is painted silver. but here are some pice of the other box that i am maken for my bros b-day.... for 2 15"s.....




Thats it for now, i plan on finishing it tomarow or wait should i say later today? i dont know but i do know is that im out. so PeaCe

-------------
hmmm.... was that the right wire?

by the way anyone who is wondering, the caddy in the back is a fleetwood caddy, 78 i think, its about 21 feet long and thats the next project after this one... cant wait to get that one started either...

-------------
hmmm.... was that the right wire?