Masked Headlights & Backlights

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60496
Printed Date: May 09, 2024 at 8:04 AM

Topic: Masked Headlights & Backlights

Posted By: Surart
Subject: Masked Headlights & Backlights
Date Posted: August 01, 2005 at 4:35 PM

Hey guys I was thinkin on how would you actually make those NFS Underground style masked headlights and backlights for any car.here are the pix to let you understand what i mean. I think it would be making a fiberglass mold on an original headlight and then cutting out the holes and placing the optic lights. but what about the back side of the lights. how would you actually install them on the car?

posted_image

Replies:

Posted By: mi_what
Date Posted: August 01, 2005 at 4:47 PM

You could probably use something along the lines of double sided tape. Why don't you just purchase some vinyl from someone ebay or another graphic company and just use that? Just order a couple foot by foot sheets of whatver color you want. take some measurements of where you want the holes to be. and cut it all out? That is really all those are anyway.

Print Page | Close Window