Print Page | Close Window

air tight?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61087
Printed Date: May 05, 2024 at 10:20 PM


Topic: air tight?

Posted By: lilbenny
Subject: air tight?
Date Posted: August 10, 2005 at 3:42 PM

when you guys place the sub and terminal? into FG boxes how do you make sure its air tight?



Replies:

Posted By: abovestock
Date Posted: August 11, 2005 at 2:01 AM
Usually mold in a piece of mdf under the fiberglass to give it a place to fit and cut out later. Or do what I do and drill a hole and run the wire through and add silicone to make it air tight. If you already have the hole cut, sand it smooth run a bead of bathroom silicone calking under the terminal and let it dry and install your terminal. Also automotive gasket material works well. Something along thoes lines.


Print Page | Close Window