bonding fiberglass to plastic
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61167
Printed Date: May 02, 2024 at 4:15 PM
Topic: bonding fiberglass to plastic
Posted By: ophidia31
Subject: bonding fiberglass to plastic
Date Posted: August 11, 2005 at 7:49 PM
i may or may not want to make some pods for aftermarket gauges onto my plastic dash piece. they make an a-pillar for my car but might want to do something a little more custom depending on how i feel at the time. is there any way to bond the fiberglass to the plastic of the dash?
-------------
Replies:
Posted By: abovestock
Date Posted: August 12, 2005 at 2:27 AM
liquid plastic after you clean both surfaces. Epoxy resin, fiberglass and polyester resin, body filler, hell even superglue. All depends on the situation.
Posted By: ophidia31
Date Posted: August 15, 2005 at 10:07 AM
where do you get this... liquid plastic? ive seen it used and they just make the piece out of it if its small enough instead of using fiberglass.
-------------
Posted By: blufab
Date Posted: August 15, 2005 at 5:34 PM
You can find it under the brand name duramix, www.selectproducts.com sells it.
Posted By: Atl_monte
Date Posted: August 20, 2005 at 10:25 PM
yea I was wondering on how ot bond fiberglass to plastic to...I want to customize my factory console in my SS monte Carlo actually just a portion of it....
Posted By: uz2bauto
Date Posted: September 21, 2005 at 5:33 PM
www.fusor.com they have great products. you can actually use some of them to bond plastics to metal. ------------- paint and body
"semi-professional"
|