flush mounting 12’s
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62101
Printed Date: April 28, 2024 at 7:07 AM
Topic: flush mounting 12’s
Posted By: 05honda
Subject: flush mounting 12’s
Date Posted: August 26, 2005 at 5:12 PM
I need to flush mount a 12" sub into the box I am making......what are the exact sies of the rings that i will need Any help would be nice.....thanks
Replies:
Posted By: Firstnbass
Date Posted: September 07, 2005 at 4:38 PM
I am a bit late getting to you, i am new at posting replys so sorry, I dont want to sound like an asd or anything but you need to measure all the areas, height, width of the actuall ring itself that will determin what size you need, all speakers or (subs) are differant in size, just by a little bit but deffinatly differant, good luck
Posted By: 05honda
Date Posted: September 07, 2005 at 10:45 PM
thanks....sorry i didnt specify.....i was trying to fluch mount kickers.....it was for a friend so i didnt have the subs to measure......
Posted By: realitycheck
Date Posted: September 08, 2005 at 7:37 AM
Hey 05 Honda,
You got an 05 civic? If so you got anything done to it yet? ------------- Learning the trade one fiberglass creation at a time!
Posted By: Firstnbass
Date Posted: September 08, 2005 at 12:23 PM
are they l7 or l5 I have both in stock and I could measure the stuff up for you , if you still need it
-------------
*ALwaYs KnoW YoUr SaLEsmAN!!*
Posted By: 05honda
Date Posted: September 17, 2005 at 8:38 AM
thanks guys...
|