Print Page | Close Window

flush mounting 12’s

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62102
Printed Date: May 11, 2025 at 7:15 PM


Topic: flush mounting 12’s

Posted By: 05honda
Subject: flush mounting 12’s
Date Posted: August 26, 2005 at 5:12 PM

I need to flush mount a 12" sub into the box I am making......what are the exact sies of the rings that i will need

Any help would be nice.....thanks




Replies:

Posted By: elmaschingon_18
Date Posted: August 26, 2005 at 5:31 PM

Hey Auther,

tell you the truth, your gonna have to measure the diameter of the subs. Basically all subs are different because of design preference by the manufactor. Or find someone on the forum that has made rings before of the same woofer.

happy glassin'



-------------
sanding sucks!



Posted By: 05honda
Date Posted: August 26, 2005 at 9:13 PM

Thanks for the input.....in that case has anyone made rings for 12" kickers......




Posted By: Clif
Date Posted: August 27, 2005 at 2:04 AM
you will need to make 2 rings, one for the sub to screw to and one that will go around the sub to make it flush. If you look in your manual for one of your subs, it will tell you your outer diam. just ad about an 1/8th to a 1/16th of and inch all the way around for propper clearence. and glass or resin or glue your rings together. and bam you got them flush mounted!

-------------
hmmm.... was that the right wire?


Print Page | Close Window