Trunk Gasket
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64229
Printed Date: May 15, 2024 at 8:58 AM
Topic: Trunk Gasket
Posted By: branvw
Subject: Trunk Gasket
Date Posted: October 12, 2005 at 9:41 AM
Ok this is the low down, i have been working on a miata trunk for about 4 months, last night i went to fit it in one last time and it looked good......BUT i have forgotten all about the gasket for the trunk and my fiberglass is almost 1/2 inch thick in some spots.... can i get a gasket that is a bigger size or some form of soft somthing to seal the trunk....HELP!!!!!
Replies:
Posted By: abovestock
Date Posted: October 12, 2005 at 10:03 AM
Pictures?
-------------
Why do you ask if I ate paint chips when I was younger?
Posted By: level12
Date Posted: October 12, 2005 at 10:16 AM
noone makes bigger gaskets that I know of. best thing to do is trim some material off until the gasket fits again. Might be time consuming but you dont want water getting in there.
-------------
Never argue with an Idiot, they will bring you down to their level and beat with you with experience.
Posted By: branvw
Date Posted: October 12, 2005 at 10:17 AM
yeah this is what i was affraid of!
|