Print Page | Close Window

Carpeting Organic Shapes

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64993
Printed Date: May 11, 2025 at 10:51 AM


Topic: Carpeting Organic Shapes

Posted By: defsquad
Subject: Carpeting Organic Shapes
Date Posted: October 25, 2005 at 4:38 PM

I just finished my fiberglass sub enclosure and I was originally going to just keep bondo'ing and sanding until its super smooth and then paint it with some high gloss, but decided I didn't have time to keep at it, since saturday is the only real day i have to work on it. I decided carpet is going to be the way to go. However, I'm extremely stupid when it comes to figuring out the best way to carpet an organic shape such as this one:
https://www.flickr.com/photos/smesser/55837397/in/set-1096066/

Any tips for carpeting a fiberglassed organic shape?

Thanks all.



Replies:

Posted By: Ween
Date Posted: October 25, 2005 at 9:33 PM

hi,

well since the enclosure appears somewhat cylindrical, i'd remove it from the vehicle.  remove the woofer.  starting at the bottom of the enclosure, i'd wrap and glue the carpet, continuing around,  leaving three or so inches at the driver opening.  then glue at the driver opening and pull/stretch the material inwards.  sounds easy doesn't it. 

mark


Print Page | Close Window