Bracing for Large Box

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65151
Printed Date: May 14, 2025 at 9:24 PM

Topic: Bracing for Large Box

Posted By: mjmauto
Subject: Bracing for Large Box
Date Posted: October 27, 2005 at 9:57 PM

I am building a large ported enclosure out of MDF for four M3 memphis 12 inch subs . The box is being built to memphis specs, the only question I have is about bracing the inside of the box. What is the best way to do this ? Any help is greatly appreciated ?

Replies:

Posted By: EM12986
Date Posted: October 28, 2005 at 12:48 PM

If you build the box right. Like wood gule then temp nail and scerw it together. You shouldnt have to brace it. I didnt on for 4 12in eclispe.But if you do you got to think that the braces take away airspace( use the corner of a board or 2x4 and cut it at a 45) . Just start with all the sides and do the top and bottom last.

Posted By: mjmauto
Date Posted: October 28, 2005 at 1:25 PM

thanks for the help.

Print Page | Close Window