Print Page | Close Window

Making a Sub box Question

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65911
Printed Date: March 28, 2024 at 7:15 PM


Topic: Making a Sub box Question

Posted By: tazmn23
Subject: Making a Sub box Question
Date Posted: November 09, 2005 at 7:53 AM

I decided to make a sub box with all fiberglass.  I only have one question though.  I am going to put 1 10" sub in box molded to the side of my trunk like I see others doing, but my wuestion is.... How would we support it to the side of the trunk so it does not tip over/roll around when taking corners?

Thanks.

Tim




Replies:

Posted By: old49er
Date Posted: November 09, 2005 at 8:42 AM

well you can drill a hole and mount to the body  





Posted By: hobobasher
Date Posted: November 09, 2005 at 2:20 PM
dont secure it to the body unless you want a hold into your floor and risk puntuing your fuel tank or having a hole in your quater panel i wouldend recomend that so the panel you used to make a mold with screw it to if you have just carpet which alot of car companies like doing i would then say go from behind the carpet put a fasner into the enclosure then seal it up dont use a huge fasner i dont think you want it touchign your sub but yeah thats your best bet




Posted By: hobobasher
Date Posted: November 09, 2005 at 2:21 PM
wow sorry about the double post sorry bout the typos




Posted By: hobobasher
Date Posted: November 09, 2005 at 8:38 PM

yeah definatly thats accually a good idea nice job






Print Page | Close Window