Source for OEM vinyl?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67247
Printed Date: May 09, 2025 at 2:34 PM

Topic: Source for OEM vinyl?

Posted By: tkur
Subject: Source for OEM vinyl?
Date Posted: November 29, 2005 at 6:03 AM

I want to do a custom console but I want it covered in OEM style vinyl with grain matching the dash in my Yukon. Can anyone point me to some sources?

Thanks,
Tom

Replies:

Posted By: auex
Date Posted: November 29, 2005 at 10:58 AM

Commercial fabric shops should carry something close enough to match the dash. Call a local stereo shop that has a rep for custom fab and ask them where they get their fabric/vinyl from.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: nstlfrk
Date Posted: November 30, 2005 at 9:34 AM

www.yourautotrim.com

Posted By: elmaschingon_18
Date Posted: December 07, 2005 at 12:10 AM

If you live in so cal J&J autofabrics is the place i go. great customer service. located in Rialto, Ca off of Riverside ave.

-------------
sanding sucks!

Posted By: DukeDuke
Date Posted: December 11, 2005 at 11:05 PM

I 2nd YourAutoTrim.com cheapest place I have EVER found, orded CF vinyl from them for $11.00 when everyone else was charging $17-25,

-------------
Duke Duke

Print Page | Close Window