Print Page | Close Window

using fiberglass matting?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67584
Printed Date: May 12, 2025 at 10:44 PM


Topic: using fiberglass matting?

Posted By: pajokijr
Subject: using fiberglass matting?
Date Posted: December 03, 2005 at 7:31 PM

ive done 2 boxes,both using fiberglass matting in each layer.some people ive seen dont use it though,they just do coats of resin then bondo after that and it seems to work. i always thought you had to use the matting though.any thoughts or reccomendations.if i could eliminate the matting id love to,just dont wanna try it then have to start over.



Replies:

Posted By: pajokijr
Date Posted: December 03, 2005 at 7:51 PM

im makin sub boxes,i just seen it done in person and on tv a couple of times...but im just gon stick to the matting to keep it safe




Posted By: 05honda
Date Posted: December 04, 2005 at 7:08 PM
Definatly stick with the mat or cloth on boxes......Resin just isnt strong enough by itself.....


Print Page | Close Window