filler for plastic

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69663
Printed Date: May 12, 2025 at 9:26 AM

Topic: filler for plastic

Posted By: 78musicman
Subject: filler for plastic
Date Posted: December 31, 2005 at 1:16 PM

I am installing a monitor into the dash.I am going to need to rework to radio bezel and fill in some to make the hole smaller.Up to 1/4 inch.Should i use bondo resin in deep areas and bondo to finish or will any of this eat at the plastic or even stick.New to this thanks.

-------------
colorado tap the rockies

Replies:

Posted By: g-twizzl
Date Posted: January 01, 2006 at 2:33 AM

if you're doing more than one job i would try duramix 4040 and 4058 paste, it's usually used to repair bumpers but should be available at your local automotive paint store. if this is the only thing in the near future, try a tube of plastic filler from the auto parts store.

Print Page | Close Window