Port for a 10w0

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70601
Printed Date: April 28, 2024 at 3:58 AM

Topic: Port for a 10w0

Posted By: Benji999
Subject: Port for a 10w0
Date Posted: January 12, 2006 at 10:18 AM

I had obtained the specs for my enclosure thru jl audios website. They had said for a ported enclosure the measurement would be 3 x 14.7. On the diagram they had a cylindrical port drawn. How would this measurement translate into a slot port design. Forgive me if this question has been asked before, I did search first.

Replies:

Posted By: driverswanted
Date Posted: January 12, 2006 at 4:24 PM

Go into the Car Audio forum, click on the search button, and do a search on "rectangle port" or "angle port" (i searched using "angle port"). It'll bring up like 4 or 5 hits. Look at the one labeled "How to calculate a rectangle port."

DYohn explains it great.

-------------
1995 Maxima
-n8

Posted By: Benji999
Date Posted: January 13, 2006 at 9:50 AM

will do, thanks

Print Page | Close Window