f.g. trunk set up for 69 chevelle!

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70735
Printed Date: April 28, 2024 at 3:28 PM

Topic: f.g. trunk set up for 69 chevelle!

Posted By: downstarinc
Subject: f.g. trunk set up for 69 chevelle!
Date Posted: January 14, 2006 at 3:33 AM

ok i got a whole jl system, from the 1/0 wire to the 4 12 w6v2's...and i have a big ol' mdf ported box that is pretty loud but doesent show off my 3g's+ of equiptment..so imma start my fiberglass box/amp display on sunday..what imma do is make the skeleton(mdf back and bottom bases)...fleece it ...resin it...glass it...and the end will be sanding, bondoing, painting,ect...just want to get some feedback/advice before i start..last f/g project took a month for a rear deck..learned alot since then tho...

...gonna look something like that...rough rough rough draft..

-------------
jl audio..nuff said

Replies:

Posted By: _juice_
Date Posted: January 14, 2006 at 8:16 AM

looks good to me
im not sure how it will sound...is it 1,2 or 4 chambers?

im guessing the 3 squares are amps?
how do you plan to mount them with them overlapping each other?

looks like it would be sweet if you build it though...when you start...post some pics of the progress for us

-------------
there is no cure for stupidity

Posted By: ragoal12
Date Posted: January 14, 2006 at 12:28 PM

what u want looks pretty good... i recommend going to jl's website and looking thru there gallery .. there are some very good FGed projects.. and you can get a ton of ideas from there as well

-------------
S.O.B custsoms.. South Omaha, Nebraska

Posted By: downstarinc
Date Posted: January 24, 2006 at 1:27 AM

https://i15.photobucket.com/albums/a395/downstarinc/subring.jpg
sub rings finally done..theyre 1 1/2in. thick..next, the skeleton.

-------------
jl audio..nuff said

Posted By: jfunk06
Date Posted: January 29, 2006 at 4:25 PM

Do you want them to be flush mounted? I would suggest making a bigger ring, so you can sink the sub into it, well, atleast i think it looks better anyway.

-------------
Govenor of Jimcinati

93' GMC Safari XT

Posted By: downstarinc
Date Posted: January 31, 2006 at 8:54 PM

flush mounted will take up more room tho...

-------------
jl audio..nuff said